70t/h Coating Machine Honeycomb Mill Drying Depolymerization Modification Surface Coating

Continuous Powder Surface Modification/Coating Machine - Honeycomb Mill/Coating Machine

Cell mill is a mechanical mill that advocates a practical process of first depolymerizing then drying, and synchronous surface treatment. It is specifically designed for the production of ultrafine powders with strict requirements for particle size distribution.

Simultaneously achieve grinding, drying, sorting, and chemical treatment for the surface of powder, while drying and depolymerizing wet ground filter cake and slurry.

The minimum processing capacity is 0.05 tons/hour, the maximum is 15 tons/hour, and the maximum water evaporation capacity is 3 tons/hour.

According to the diversity of materials, different materials can be used inside the equipment, which has the advantage of retaining the color and purity of the materials. The coverage rate can reach 99.2%, and the activation rate can reach 99.8%.

　　Features of Honeycomb Mill:

1. Cell mill is based on a modular design, which allows optimum design for each piece of equipment for different environments while maintaining the basic principles and the same parts.
2. The equipment performance is optimized by varying the number of layers of the rotor and the number of blades. The separator installed in one piece will not affect the structure of the main grinding chamber.
3. The structural design of the module makes it easy to maintain and replace consumable parts.
4. The material of the rotor blade can be hardened steel, stainless steel, or steel-bonded tungsten.
5. The material of the grinding groove shall be steel, stainless steel, or high-alumina ceramic.

Honeycomb Mill Characteristics

1. The rotor and liner strip can be taken out of the mill as a whole

2. The rotor and liner can be repaired outside the mill to reduce downtime

3. The rotating parts use driving pins instead of keys for easy installation.

4. No blades or liner bolts in the mill.

5. The rotating parts are subject to dynamic balance inspection before installation to ensure the service life of the bearing.

6. No adjustments to the cell mill are required during normal operation.